your one-stop certification solution!
What is JIS Certification for Japan?
The JIS Mark is a mandatory certification based on product certification that verifies the conformity of products according to the Japanese Industrial Standards (JIS). JIS covers industrial and mineral products, data, services and management systems under the Industrial Standardization Act of Japan. The Japanese Industrial Standards are issued by JISC – Japanese Industrial Standards Committee.
The product has to be marked with the applicable JIS Mark:
For which Products is JIS Certification relevant
JIS has over 10,000 standards. The products are divided into 20 different categories:
A (Construction and Architecture)
General, building, testing, inspection, surveying, design, planning, equipment, fittings, materials, parts, construction, construction machinery and equipment
B (General mechanical engineering)
Machine fundamentals/machine parts/FA general/tools/devices/machine tools/optical machines/precision machines
C (Electronic devices and electrical machines)
Measuring and testing devices and materials/Wires, cables and electrical circuits/Electrical machines and devices/Communication devices/Electronic devices/components/Bulbs, lighting devices, wiring devices, batteries/Household appliances
D (motor vehicles)
Test and inspection methods/common parts/engines/chassis/car bodies/electrical equipment/instruments/construction vehicles/industrial vehicles/repairs, adjustments, tests and inspection instruments/bicycles
E (Railway)
General rails, tracks, signaling and safety systems, general rail vehicles, railcars, passenger cars, cable cars and cable railways
F (Ship)
Hull/engine/electrical equipment/navigation equipment/instrumentation/machine measuring instruments
G (Steel)
Analysis/raw materials/steel products/cast iron/ pig iron
H (non-ferrous metals)
Analysis methods/raw materials/copper products/other drawn materials/castings/functional materials/processing methods and instruments
K (Chemistry)
Chemical analysis/Environmental
L (fiber)
Testing/Inspection/Yarn/Textile/Textile/Textile Processing Equipment
M (Mine)
Mining/Beneficiation/Coal Preparation/Transportation/Security/Mineral Products
P (Pulp & Paper)
Pulp / Paper / Paper Work / Test & Measurement
Q (Management System)
Reference Materials/Management Systems, etc.
R (Ceramics)
Ceramics / Refractories and insulation materials / Glass and glass fibers / Enamel / Cement / Abrasives / Special ceramic products / Carbon products / Special equipment for ceramics
S (daily necessities)
Furniture / Upholstery / Gas-oil burning equipment / Table utensils / Kitchen utensils / Personal items / Kimono / Stationery / Office supplies / Exercise equipment / Entertainment goods / Music supplies
T (Medical Safety Equipment)
Medical electrical equipment, general medical equipment, dental equipment, dental materials, medical equipment and equipment, occupational safety, welfare-related equipment, hygiene products
W (Aviation)
Specialized materials, standard parts, airframes, engines, instruments, electrical equipment, ground equipment
X (Information Processing)
Programming Languages, Graphics, Document Processing, Document Exchange, OSI, LAN, Data Communications, Output Devices, Recording Media
Y (Service)
General/Common/Industrial Machinery
Z (Other)
Logistics equipment, Packaging materials, containers, and packaging methods, Common test methods, Welding, Radiation, Micrographics, Basics, Environment, Resource Recycling, Factory management, Quality control
JIS Mark certification process
The JIS Mark Certification includes sample testing and a factory audit may also be required depending on the type of certification.
Initial Conformity Assessment | Certification Maintenance Surveillance | Product Example | ||
Product Testing | Factory Audit | |||
General Certification | Sample Test | Yes | Yes | Mass produced Products |
Lot Certification (1) | Sample Test | Yes | No | Imported lots, Limited products |
Lot Certification (2) | Test for all items | Possible to omit | No | Imported lots, Limited products |
Application preparation
Conformity assessment
Factory audit and/or product tests (if necessary)
Certificate of conformity
Marking of the products
The Factory Audit will be conducted by a Registered Certification Body (RCB). The product testing also has to be done in the test laboratory of the RCB. If the manufacturer has an internal test laboratory, witness testing can be conducted during the factory audit.
For mass-produced products, a sample test is conducted for each product unit.
In the case of Lot certification, the Registered Certification Body may conduct testing for each lot or batch.
A Periodic Certification Maintenance Surveillance (Follow-Up) is necessary to keep the JIS Mark certificate valid.
Periodic JIS Certification Maintenance Surveillance (Follow-Up)
A JIS Certification Maintenance Surveillance must be conducted a minimum of every 3 years. The surveillance inspection will require new product tests and a factory audit.
In addition to the JIS Certification Maintenance Surveillance a Temporal Certification Maintenance Surveillance can be requested if:
- The specification of a certified product or quality management system is changed.
- When the corresponding JIS Standard is revised.
- If there are complaints from a third party.
- If the RCB considers it necessary.
Change Management and Adding New Products
If you want to add new products that do not have a JIS Mark Certification yet, a new initial certification for these products will have to be applied for. This will also involve product testing and factory audits.
If changes are made to a certified product that has a JIS Mark a change application must be submitted. The responsible RCB will then decide whether new product tests and a factory audit are necessary.
Which Products are covered by JIS Mark?
The JIS Mark is covering a wide range of products which are mainly categorized in the following groups:
- Civil Engineering and Architecture
- Mechanical Engineering
- Electronic and Electrical Engineering
- Automotive Engineering
- Railway Engineering
- Shipbuilding
- Ferrous Materials and Metallurgy
- Nonferrous Materials and Metallurgy
- Chemical Engineering
- Textile Engineering
- Mining
- Pulp and Paper
- Management System
- Ceramics
- Domestic Wares
- Medical Equipment and Safety Appliances
- Aircraft and Aviation
- Information Processing
- Miscellaneous
MPR Services
Your One-Stop Certification Solution.
Our complete package for product certifications for Japan.
Clarification of the certification requirements
Personal consultant for all questions about JIS
Application preparation and communication with the authorities
Preparation and support for the audit
Organization of testing
Advice on how to mark your products, if needed
Complete organization of any follow-up certifications
Contact Us!
MPR Japan Certification – expert consulting and implementation of certification projects worldwide.
JIS CERTIFICATION VIDEO
Please enable cookies to enable embedded YouTube videos. For privacy-related details on data exchange through use of the videos as well as changeable cookie settings, please see the privacy policy page.
You are currently viewing a placeholder content from Default. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information